A Guide to Assessment Validation: Validating Assessments in Practice
A Guide to Assessment Validation: Validating Assessments in Practice
Blog Article
RTOs face many tasks after registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation is typically the most daunting.
Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.
In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.
Clause 1.8 of the SRTOs 2015 mandates that RTOs ensure their assessment systems, including RPL, are compliant with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
We are required by the standards to carry out two types of validation.
The primary validation type ensures compliance with the training package requirements for your RTO's assessments.
The following validation type ensures that assessments follow the principles of assessment and rules of evidence.
This shows that validation happens pre- and post-assessment. We will focus on the first type—assessment tool validation.
The Basics of the Two Types of Assessment Validation
Assessment Validation Explained
As mentioned earlier and in our earlier blogs, validation is split into two parts: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation or assessment tool validation focuses on the first part of the clause, ensuring that all unit requirements are met and that workbooks are entirely compliant.
On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
This article will focus on assessment tool validation.
Steps to Perform Assessment Tool Validation
After reviewing the two types of validation, let’s explore the specifics of assessment tool validation.
When to Conduct Assessment Tool Validation
The aim of assessment tool validation is to make sure that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.
Hence, whenever new learning resources are bought, assessment tool validation should be carried out before students use them.
There's no need to wait for your next 5-year cycle validation schedule. Validate new resources immediately to ensure they are suitable for student use.
However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:
- resources are updated by you
- new training products get added on scope
- when course is reviewed against training product updates
- your learning resources get identified as a risk during your risk assessment
ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.
Determining Training Products for Validation
Recall, this type of validation aims to ensure all learning resources are compliant before use. All RTOs must validate each unit's resources.
Key Resources for Assessment Tool Validation
Academic Resources
Since you are validating your assessment tools, you will require the entire suite of your learning resources:
Mapping tool – the initial document to investigate. It identifies which assessment items address unit requirements, helping speed up validation.
Learner/student workbook – ensure it's appropriate for use as an assessment tool. Check if instructions are clear and answer fields are sufficient. This is a frequent gap.
Assessor guide/marking guide – check that instructions for assessors are adequate and that there are clear benchmarks for each assessment item. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.
Assessment Validation Panel
Clause 1.11 outlines the requirements for validation panel members, indicating validation can be done by one or more individuals. Typically, RTOs require all trainers and assessors to attend, occasionally inviting industry experts.
Overall, your validation panel should have:
Vocational competencies and current industry skills that relate to the unit being validated
Up-to-date expertise and skills in vocational teaching and learning
Any one of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or an equivalent successor
Assessment validation document/template
Having a website validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists with the validation process and documentation. It makes it easier to view how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.
Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.
Assessment Principles Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Although these templates ease the validation process, they can cause errors in judgment as there is minimal space for commenting on each assessment item.
We strongly recommend using a more detailed template to inspect each unit requirement and the assessment items that map to them. Here is an example:
Element Performance Criteria Instructions for Assessment Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Inspection?
As highlighted in our blog post Common Problems In Assessment Tools, it is essential that your assessment tools enable trainers to adhere to assessment principles and evidence rules.
Assessment Basic Principles
Fairness – Does the assessment provide equal opportunity and access to all participants?
Flexibility – Are multiple options available in the assessment to demonstrate competence based on different needs and preferences?
Validity – Is the assessment evaluating what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment produce the same results each time, regardless of who conducts the training? Will different assessors make consistent decisions on skill competence?
Evidence Basic Rules
Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool prove that the work is the candidate’s own?
Currency – Do the assessment tools align with current units of competency and up-to-date industry practices?
Even though these are regularly addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To avoid employing learning resources that leave unit requirements unmet, be sure to follow these guidelines:
Demonstrate What You Teach
Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
nappy change
prepare bottles, bottle-feed babies, and clean equipment
prepare solid foods and feed infants
respond properly to baby signs and cues
prepare infants for sleep and soothe them
monitor and support age-appropriate physical exploration and gross motor skills
Having students explain the process of nappy changing for babies under 12 months old doesn’t fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
Full or Not Competent
Pay attention to lists. As mentioned earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be Clearer?
Every assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are clear and not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What information might be included in a work package?
Possible answers include:
Necessary resources
Associated expenses
Activity timeframe
Appointed roles and responsibilities
When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.
The same applies to assessment items with double-barrelled questions or those requiring multiple answers simultaneously. These can confuse students and assessors, as demonstrated in the sample question below:
Identify a hazard and/or environmental concern in the workplace and select the most effective hazard control hierarchy.
Possible answers may include, but are not limited to:
Weather conditions – isolating the work area, engineering controls, personal protective equipment
Work area and ground conditions – eliminating hazards, isolation, engineering
People – isolating, use of engineering controls, administration
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolation, engineering, administration
Equipment or machinery – isolation, engineering controls, administration
Avoiding double-barrelled questions makes it easier for students to respond and for assessors to accurately judge student competence.
Given these requirements, you might think, “Don’t learning resource developers provide audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This impacts your compliance history, so it’s wiser to take the safe and compliant route.